01312400, 01312401, 90707000, 90707700, 907-070 or 52355 and Parity Plus # 83316
Replacement Filter for CRV "A", "B" and "E" series burners. Metal end caps, fire retardant media paper, metal outer screen. 96 pleats means longer service life. Order 1030-8331 Gaskets separately. Packed 24 or 1/2 case quantities.
01367800 and 01367900
A-B Combustion Chamber Gasket durable enough to bounce around in a service truck without losing its shape or functionality till fired. Withstands temperatures up to 1250 degrees F. For use on A, B, 6-60 and 5-40 series CRVac burners. You won't want to use another. Packaged 12 to a box. Shipping Weight 1 lb.
3-564, 013564 and 01356400
4-40 Combustion Chamber Gasket durable enough to bounce around in a service truck without losing its shape or functionality till fired. Withstands temperatures up to 1250 degrees F. For use on 4-40 series CRVac burners only. You won't want to use another. Packaged 12 to a box. Shipping Weight 1 lb.
01361300, 01361301, 01361302, 13-613, 13-614, 52356, or 52357
Filter Gasket Set fits filter #1020-8331. Adhesive backed, closed cell foam, 1/2 inch thick. Packed 24 sets to a carton or in whatever amounts you require. We work with you. Shipping wt. 1 lb.
02713700, 02713701, 02553200, 01351200 or 13-513
Mica Window Replacement used on CRVac A, B, E, 4-40 5-40. Mica window is molded into the gasket. Service personnel no longer will have to assemble while in the air. Packed 12 to a carton. 1/4-20 nuts or 1/4-20 x 1/2" bolts not included but can be ordered separately. Shipping Weight 1/2 lb.
01336000, 70100600, 900-268 or Eaton NC1-1181-1 or White Rodgers 25K49A-1
Replacement kit for CRVac "A" Valve. White Rodgers valve with brass fittings and pilot tube. Replaces obsolete NG or LP Eaton valve in all series CRV, 4-40, 5-40, 6-60 burners. When used in a CRVac burner it replaces 25K49 A-1 or Eaton. Instructions included. Individually packaged. Shipping wt 3 lb.
70100502, 70100500 or NC-1-1181-1F
CSA Marked Replacement Valve NG only. White Rodgers Valve. Replaces obsolete Eaton valve in GRay RTH-75A-NG ONLY. Instructions included. Individually packaged. Shipping wt 3 lbs.
90031600
Plastic Encapsulated replacement coil for obsolete Eaton valve. Used on CRV "A" and RTH 75A burners. This is a GENUINE replacement to the NC1-1181 Valve. Has a slightly smaller ID than older (Y-55375-8) string wrapped style. Orange encapsulated coil. 110 volt.
90207000, 90207100, 02725300
Maxitrol 500Z zero pressure governor. 1/2" x 1/2" #R500Z with 12A04 vent limiting orifice installed. 1/2 pound max inlet pressure.
90436500 or S89G1021 (2)
HSI Control Module Honeywell S89G1021(2)
90434002, RAM-3M3-03, or 90434004, RAM-3MC-10-01
Ram Control # 3MC-10-02 replaces # 3MC-10-01 when used as a replacement in model CTH & EV radiant heaters. When replacing 3M3-03 order adapter separately.
02713501, 90434000 and 90423300
Direct Spark Ignition Control Fenwal used on CRV "B" & "E" series burners. 3 tries-for-ignition, 30 second prepurge, remote sensing, edge connector for plug-in wire connection. Fenwal # 2460D606-227 replaces obsolete # 05-162426-007, 05-296466-257 & 05-296426-757. Packed individually. Shipping wt 1 lb.
90425600, 01316600, 01320600, 38285, 904-171 OR 904-174,WR 5059A-600, and 5059A-500
Spark Igniter, Pilot Relite. This is an exact replacement. Used in RTH 75A and "A" style CRV infrared heaters. This unit comes with 8" wire leads. A spark plug style terminal is located on top. 120 volt. Individually packed.
01320200, 91309000 and Auburn 149T-1
Auburn Spark Plug Electrode. This electrode plug is made using aircraft quality materials for use in 100v CRVac Series Vented Tubular Infrared System burners. Includes brass sealing washer.
01320700, 91309116
High voltage Ignition Cable Replacement. Complete with Terminals and sealing grommet. Silicone insulation resists cracking.
91313100 and Auburn E4R8
Spark Plug Electrode S.L.Auburn. This electrode plug is made using aircraft quality materials for use in GRay 75A Series burners. Individually packaged.
90300200, 01313701, 13-137, 25-108, 02510800, 29825 or 903-002-105, and WR 30A46-105
Pilot Switch, Thermocouple or Pilot Assembly. The main function of this device is to turn on the main burner valve. Pilot switch is an exact replacement with a 2-1/8" probe length, measured from ferrule to end of probe. This longer length is used in the RTH 75-A and "A: series 60,000 and 80,000 burners. When you see a pilot flame but do not feel any output, replace with this GENUINE W-R part. Packed 1 to a carton.
903-002-52, 903-042 or 01310902
Pilot Switch, Thermocouple or Pilot Assembly. The main function of this device is to turn on the main burner valve. Pilot switch is an exact replacement with a 1-7/8" probe length, measured from ferrule to end of probe. This shorter length is used in the 20,000 and 40,000 btu/hr. burners. If you do not see the length you require, give us a call. We'll have it in no time!. Packed 1 to a carton.
58954, 113-230, 13-267, 25-215, 01326700
Exact replacement for 4 prong pilot sensors. Solder terminals. No wires included.
01330000 OR 01324700
Pilot Shield ASSM Replacement very special high temperature alloy. Mounting holes are oval to make installation and alignment easy. 2 slotted head screws included. 1/4 lb. shipping weight. Individually boxed.
90436600
Hot Surface Igniter with Plug. Exact replacement except this replacement part is nestled in Styrofoam and protected in its own cardboard carton. Shipping Weight 1/2 lb.
90436600
Hot Surface Ignitor 16" Long Leads. Exact replacement except this replacement part is nestled in Styrofoam and protected in its own cardboard carton, no worry about it breaking in a service truck. Shipping Weight 1/2 lb.
90430700 or 02713200
Electrode Assembly used in "B" & "E" style CRV infrared burners. Included is a high temperature gasket. High temperature wire used to manufacture the electrode, ground and flame rods. Individually packed.
90425200 Camstat #S106-2B61-55C
Pump Overrun Relay and or Circuit timer Relay 24v was used for a while but not as popular as the 120V model. Used in Control panel. Extra Heavy-duty contacts. Terminal labeling is the same, when used as Overrun relay the post purge time is 45-75 seconds. 24V heater. An excellent choice for replacement purposes. Packed 1 per carton.
01335501 060-120v
Pump Overrun Relay and or Circuit Timer Relay. 120V. Replaces, Klixon ETA, CamStat and White Rodgers. Extra Heavy-duty contacts. Terminal labeling is the same. When used as Overrun relay the post purge time is 45-75 seconds. 120V heater. An excellent choice for replacement purposes. Packed 1 per carton.
90426200
Control Timer. Genuine SSAC. This is an exact replacement. Used in the latest "A" & "B" control panels. 24V input. Packed 1 to a carton.
RG®#'s 01311600 or 90600601 and GE® 5KC37LN44X or Westinghouse® 325P237 Franklin # 4113007400 Parity Plus # CRV-A-050F or CRVA050F
1/2 HP Bluffton Vacuum Pump Motor 48 frame, base mounted, 3450 rpm. Capacitor Start, internal safety end switch, 115/230V, FLA 7 / 3.5, reversible, TEFC 1/2" shaft, 2-1/4" shaft High-temp ball bearings front and rear. For convenience a mounted moisture-proof conduit box is included. This motor was designed with extra heavy start windings. Shipping wt. 19 lb. Approx.
90604500 or Franklin® # 1113821400 and 1113007432
3/4 HP Bluffton Vacuum Pump Motor 56 frame, base mounted, 3450 rpm. Capacitor Start, internal safety end switch, 115/230V, FLA 10.0 / 5.0, reversible, TEFC 5/8" keyed shaft. For your convenience included is a mounted moisture-proof conduit box. High-temp grease and ball bearings front and rear. Shipping wt. 28 lb. Approx.
90708600, 907086-00, Magnetek JB1M116NS
Used on CTH2, HE, TF-120, ER, ET3. 115v 60hz, 3000 RPM, Ball Bearings.
91411901 or 91412801
Vacuum Pump Boot manufactured with HI-TEMP Silicone rubber, wire reinforced on outer surface to extend reliability.
0277100 or 91901300 & 91906900
Vacuum Pump Boot Kit. Includes 4.5 x 8" boot, rubber spacer and 2 SS hose clamps.
4" ID x 12" Heavy Duty Tubing Coupler 18 Ga. Aluminized steel with two (2) attached draw bands makes this the best radiant tubing connector available. Aligns tubes and keeps them straight. Self-centering stop. Shipping wt. 2.6 lb.
Parity Plus Company is not affiliated with all the Companies mentioned in our website. References to Company Names are for identification purpose only. They are not trademarks or trade names used by or affiliated with Parity Plus Company. RG and Corayvac are the registered trademarks of Roberts Gordon LLC, Buffalo NY. Parity Plus Company sells products that require professional installation. Buyer(s) acknowledge that they are responsible to enlist the services of trained service professionals in the service and repair of heating appliances. Repair parts sold by Parity Plus Company may require specialized tools and/or procedures for safe and reliable operation of the effected systems. Buyer(s) specifically hold Parity Plus Company harmless for injury, property damage, or other losses associated with the use of items purchased from Parity Plus Company. It is not the intention of Parity Plus Company to encourage the servicing of HVAC appliances by untrained personnel, rather to allow the public to purchase the necessary parts directly for use by trained and/or licensed professionals.